개발자를 위한 API 참조

시작하기 인증 시도 횟수 제한 응답 처리

개발자를 위한 API 참조

시작하기

시스템에서 요청을 처리하려면 API 키가 필요합니다. 사용자가 등록하면 해당 사용자에 대한 API 키가 자동으로 생성됩니다. API 키는 각 요청과 함께 전송되어야 합니다(아래 전체 예시 참조). API 키가 전송되지 않거나 만료된 경우 오류가 발생합니다. 남용을 방지하려면 API 키를 비밀로 유지하시기 바랍니다.

인증

API 시스템으로 인증하려면 각 요청마다 API 키를 인증 토큰으로 보내야 합니다. 아래에서 샘플 코드를 볼 수 있습니다.

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
));

$response = curl_exec($curl);

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

시도 횟수 제한

우리 API에는 안정성을 극대화하기 위해 요청 급증을 방지하는 속도 제한기가 있습니다. 우리의 비율 제한은 현재 1분당 30개의 요청으로 제한됩니다.

여러 헤더가 응답과 함께 전송되며 이를 검사하여 요청에 대한 다양한 정보를 확인할 수 있습니다.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP

응답 처리

모든 API 응답은 기본적으로 JSON 형식으로 반환됩니다. 이를 사용 가능한 데이터로 변환하려면 언어에 따라 적절한 기능을 사용해야 합니다. PHP에서는 json_decode() 함수를 사용하여 데이터를 객체(기본값) 또는 배열(두 번째 매개변수를 true로 설정)로 변환할 수 있습니다. 오류 키는 오류가 발생했는지 여부에 대한 정보를 제공하므로 확인하는 것이 매우 중요합니다. 헤더 코드도 확인할 수 있습니다.

{
    "error": 1,
    "message": "An error occurred"
}

Account

Get Account

GET https://fur.al/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}

Update Account

PUT https://fur.al/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "email": "[email protected]",
	    "password": "newpassword"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "[email protected]",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Account has been successfully updated."
}

CTA 오버레이

List CTA Overlays

GET https://fur.al/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

QR 코드

List QR codes

GET https://fur.al/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/fur.al\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/fur.al\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a single QR Code

GET https://fur.al/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/fur.al\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}

Create a QR Code

POST https://fur.al/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
type	(required) text \| vcard \| link \| email \| phone \| sms \| wifi
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 3,
    "link": "https:\/\/fur.al\/qr\/a58f79"
}

Update QR Code

PUT https://fur.al/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "QR has been updated successfully."
}

Delete a QR Code

DELETE https://fur.al/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://fur.al/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://fur.al/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

링크

List Links

GET https://fur.al/api/urls?limit=2&page=1&order=date

To get your links via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request
order	(optional) Sort data between date or click

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/urls?limit=2&page=1&order=date",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/urls?limit=2&page=1&order=date',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "urls": [
            {
                "id": 2,
                "alias": "google",
                "shorturl": "https:\/\/fur.al\/google",
                "longurl": "https:\/\/google.com",
                "clicks": 0,
                "title": "Google",
                "description": "",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "alias": "googlecanada",
                "shorturl": "https:\/\/fur.al\/googlecanada",
                "longurl": "https:\/\/google.ca",
                "clicks": 0,
                "title": "Google Canada",
                "description": "",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a Single Link

GET https://fur.al/api/url/:id

To get details for a single link via the API, you can use this endpoint.

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/url/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/url/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "details": {
        "id": 1,
        "shorturl": "https:\/\/fur.al\/googlecanada",
        "longurl": "https:\/\/google.com",
        "title": "Google",
        "description": "",
        "location": {
            "canada": "https:\/\/google.ca",
            "united states": "https:\/\/google.us"
        },
        "device": {
            "iphone": "https:\/\/google.com",
            "android": "https:\/\/google.com"
        },
        "expiry": null,
        "date": "2020-11-10 18:01:43"
    },
    "data": {
        "clicks": 0,
        "uniqueClicks": 0,
        "topCountries": 0,
        "topReferrers": 0,
        "topBrowsers": 0,
        "topOs": 0,
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "google": 0
        }
    }
}

Shorten a Link

POST https://fur.al/api/url/add

To shorten a link, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
languagetarget	(optional) Language targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description
metaimage	(optional) Link to a jpg or png image

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "metatitle": "Not Google",
    "metadescription": "Not Google description",
    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "languagetarget": [
        {
            "language": "en",
            "link": "https:\/\/google.com"
        },
        {
            "language": "fr",
            "link": "https:\/\/google.ca"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "url": "https:\/\/google.com",
	    "custom": "google",
	    "password": "mypass",
	    "expiry": "2020-11-11 12:00:00",
	    "type": "splash",
	    "metatitle": "Not Google",
	    "metadescription": "Not Google description",
	    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
	    "geotarget": [
	        {
	            "location": "Canada",
	            "link": "https:\/\/google.ca"
	        },
	        {
	            "location": "United States",
	            "link": "https:\/\/google.us"
	        }
	    ],
	    "devicetarget": [
	        {
	            "device": "iPhone",
	            "link": "https:\/\/google.com"
	        },
	        {
	            "device": "Android",
	            "link": "https:\/\/google.com"
	        }
	    ],
	    "languagetarget": [
	        {
	            "language": "en",
	            "link": "https:\/\/google.com"
	        },
	        {
	            "language": "fr",
	            "link": "https:\/\/google.ca"
	        }
	    ],
	    "parameters": [
	        {
	            "name": "aff",
	            "value": "3"
	        },
	        {
	            "device": "gtm_source",
	            "link": "api"
	        }
	    ]
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/url/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "metatitle": "Not Google",
    "metadescription": "Not Google description",
    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "languagetarget": [
        {
            "language": "en",
            "link": "https:\/\/google.com"
        },
        {
            "language": "fr",
            "link": "https:\/\/google.ca"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 3,
    "shorturl": "https:\/\/fur.al\/google"
}

링크 업데이트

PUT https://fur.al/api/url/:id/update

To update a link, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash]
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
languagetarget	(optional) Language targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description
metaimage	(optional) Link to a jpg or png image

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/url/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "url": "https:\/\/google.com",
	    "custom": "google",
	    "password": "mypass",
	    "expiry": "2020-11-11 12:00:00",
	    "type": "splash",
	    "geotarget": [
	        {
	            "location": "Canada",
	            "link": "https:\/\/google.ca"
	        },
	        {
	            "location": "United States",
	            "link": "https:\/\/google.us"
	        }
	    ],
	    "devicetarget": [
	        {
	            "device": "iPhone",
	            "link": "https:\/\/google.com"
	        },
	        {
	            "device": "Android",
	            "link": "https:\/\/google.com"
	        }
	    ],
	    "parameters": [
	        {
	            "name": "aff",
	            "value": "3"
	        },
	        {
	            "device": "gtm_source",
	            "link": "api"
	        }
	    ]
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/url/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 3,
    "short": "https:\/\/fur.al\/google"
}

Delete a Link

DELETE https://fur.al/api/url/:id/delete

To delete a link, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://fur.al/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/url/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://fur.al/api/url/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Link has been deleted successfully"
}

브랜드 도메인

List Branded Domains

GET https://fur.al/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}

Create a Branded Domain

POST https://fur.al/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

매개변수	설명
domain	(required) Branded domain including http or https
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "domain": "https:\/\/domain1.com",
	    "redirectroot": "https:\/\/rootdomain.com",
	    "redirect404": "https:\/\/rootdomain.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 1
}

도메인 업데이트

PUT https://fur.al/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "redirectroot": "https:\/\/rootdomain-new.com",
	    "redirect404": "https:\/\/rootdomain-new.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Domain has been updated successfully."
}

Delete Domain

DELETE https://fur.al/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://fur.al/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://fur.al/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

채널

List Channels

GET https://fur.al/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}

List Channel Items

GET https://fur.al/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/fur.al\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/fur.al\/mybio",
                "link": "https:\/\/fur.al\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}

Create a Channel

POST https://fur.al/api/channel/add

A channel can be added using this endpoint.

매개변수	설명
name	(required) Channel name
description	(optional) Channel description
color	(optional) Channel badge color (HEX)
starred	(optional) Star the channel or not (true or false)

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Channel",
	    "description": "my new channel",
	    "color": "#000000",
	    "starred": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}

Assign an Item to a Channel

POST https://fur.al/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

매개변수	설명
:channelid	(required) Channel ID
:type	(required) links or bio or qr
:itemid	(required) Item ID

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Item successfully added to the channel."
}

채널 업데이트

PUT https://fur.al/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
name	(optional) Channel name
description	(optional) Channel description
color	(optional) Channel badge color (HEX)
starred	(optional) Star the channel or not (true or false)

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Acme Corp",
	    "description": "channel for items for Acme Corp",
	    "color": "#FFFFFF",
	    "starred": false
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Channel has been updated successfully."
}

Delete Channel

DELETE https://fur.al/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

cURL PHP Node.js

curl --location --request DELETE 'https://fur.al/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://fur.al/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

캠페인

List Campaigns

GET https://fur.al/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}

캠페인 만들기

POST https://fur.al/api/campaign/add

A campaign can be added using this endpoint.

매개변수	설명
name	(optional) Campaign name
slug	(optional) Rotator Slug
public	(optional) Access

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Campaign",
	    "slug": "new-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}

Assign a Link to a Campaign

POST https://fur.al/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Link successfully added to the campaign."
}

캠페인 업데이트

PUT https://fur.al/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
name	(required) Campaign name
slug	(optional) Rotator Slug
public	(optional) Access

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Twitter Campaign",
	    "slug": "twitter-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}

Delete Campaign

DELETE https://fur.al/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://fur.al/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://fur.al/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

커스텀 스플래시

List Custom Splash

GET https://fur.al/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

픽셀

List Pixels

GET https://fur.al/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

매개변수	설명
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://fur.al/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://fur.al/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Create a Pixel

POST https://fur.al/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

매개변수	설명
type	(required) gtmpixel \| gapixel \| fbpixel \| adwordspixel \| linkedinpixel \| twitterpixel \| adrollpixel \| quorapixel \| pinterest \| bing \| snapchat \| reddit \| tiktok
name	(required) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP Node.js

curl --location --request POST 'https://fur.al/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "gtmpixel",
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://fur.al/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "id": 1
}

픽셀 업데이트

PUT https://fur.al/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

매개변수	설명
name	(optional) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP Node.js

curl --location --request PUT 'https://fur.al/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://fur.al/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Pixel has been updated successfully."
}

Delete Pixel

DELETE https://fur.al/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://fur.al/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://fur.al/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://fur.al/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

서버 응답

{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}